Robur Supercromo - 6.4.3.2 Set the On;Off Programs

Normal operation
22
6
6.4.3.2 Set the on/o programs
1. Press the TIMER button. The LCD screen will show
1
:
ON
(switch-on program 1 ON).
2. Press the DAY button to select any of the 15 daily pro-
gram combinations of your choice. Continuing to press
the DAY button, the display will alternate between the
15 available combinations (Figure 6.4 p.22 ).
3. Press the HOUR, MIN buttons respectively to set the
desired hour and minutes for program 1 ON.
4. After nished setting program 1 ON, press the TIMER
button again,
1
:
OFF
will appear on the display
(switch-o program 1 OFF).
5. Press the DAY button and select the same combina-
tion of daily programs chosen for program 1 ON. If
you keep pressing the DAY button, the 15 available
combinations will alternate on the display (Figure
6.4 p.22 ).
The combination of days chosen in each of the ON/
OFF time programs must be consistent. If you set
MO-WE-FR in program 1 ON, you must set MO-
WE-FR also for program 1 OFF.
6. Press the HOUR, MIN buttons respectively to set the
desired hour and minutes for program 1 OFF.
7. When nished setting programs 1ON and 1 OFF,
press TIMER button,
2
:
ON
will appear on the display
(switch-on program 2 ON)
8. If you want to set additional switch-on and switch-o
programs, repeat the programming procedure de-
scribed above.
The programmable timer allows you to set up to a
maximum of 16 ON/OFF programming intervals.
9. At the end of the program setting, press the CLOCK
button, the programmable timer will start running the
programs.
When programming is completed, it is advisable to
check that you have not set contrasting programs
in order to avoid unwanted switching on and/or
switching o. Pressing the TIMER button the on/o
programs set will be displayed.
Figure6.4 15 combination of days in a week
1 From Monday to Sunday
2 Monday
3 Tuesday
4 Wednesday
5 Thursday
6 Friday
7 Saturday
8 Sunday
9 Monday, Wednesday, Friday
10 Tuesday, Thursday, Saturday
11 Saturday, Sunday
12 From Monday to
Wednesday
13 From Thursday to Saturday
14 From Monday to Friday
15 From Monday to Saturday
1. MO TU WE TH FR SA SU
2. MO
3. TU
4. WE
5. TH
6. FR
7. SA
8. SU
9. MO WE FR
10. TU TH SA
11. SA SU
12. MO TU WE
13. TH FR SA
14. MO TU WE TH FR
15. MO TU WE TH FR SA
6.4.4 Program skip function
6.4.4.1 How to use the program skip functions
The program skip functions allow you to temporarily sus-
pend the running of the set programs, to force a tempo-
rary switch-o (case 1) or a temporary switch-on (case 2).
The programmed operation is resumed returning to the
AUTO mode, starting from the following time program.
Program skip functions are eective only when the
programmable timer is running in AUTO mode.
6.4.4.2 Temporary skipping programs
During operation in AUTO mode it is possible to tempo-
rarily skip one or more set programs, as specied below.
Case 1: the status of the programmable timer output is
"ON" (red LED lit)
1. Press the MANUAL button to move the indicator from
"AUTO" to "OFF", the programmable timer output will
change to the state "OFF" and the red LED will switch
o; this way, the set programs will be skipped.
2. To reactivate the running of the set programs, press
the MANUAL button again, the indicator will move
from "OFF" to "AUTO" but the output of the program-
mable timer will continue to stay "OFF" (red LED o).
The programmable timer will resume its automatic op-
eration when the next program will switch to the sta-
tus "ON" (i.e. until the status of the request is changed).