Roche CoaguChek XS System - Setting the Date and Time

CoaguChek XS System User Manual for Self-Testing, version 10.0 USA
19
Setting the Date and Time
The date and time settings are important. Each time
you run a test, the meter compares its date with the
test strip’s expiration date. If the test strips are
expired, the meter displays an error message and
prevents you from running a test.
Note: If the date and time settings have not been set
correctly, the meter may not detect that an expired
test strip or an expired code chip is used.
Whenever you put batteries in the meter, it
automatically goes to Setup mode (where you set the
date and time). You can also go to Setup mode at
any time by pressing the SET button ( ).
To set the date and time, you’ll use these buttons:
• to change a setting.
• (SET) to accept a setting.