Roche CoaguChek XS System - Erasing Stored Test Results

CoaguChek XS System User Manual for Self-Testing, version 10.0 USA
51
Erasing Stored Test Results
You can erase all of the test results that are stored in
the meter’s memory. You cannot, however, erase
individual test results.
To erase all stored results:
1. Go to Erase mode
With the meter turned off,
press and hold down the
M button . While you
are holding down the M
button, press the ON-OFF
button and then hold
down both buttons for at
least 5 seconds.
The meter displays mem
(flashing) and clr. The
number of results in
memory is shown in the
top-right corner of the
display.