CoaguChek XS System User Manual for Self-Testing, version 10.0 USA
22
Setting the measuring unit to INR
In case the measuring unit next to the result is
displayed in %Q or Sec, the unit has to be set back to
INR unless your doctor has instructed you to
measure in a unit other than INR (i.e. %Quick or
Seconds):
Please note: This procedure is only applicable for
software versions 5.40 and lower. Refer to section
Meter Setup above for information on how to
retrieve the software version installed on your meter.
For software versions from 5.4x on, INR is the only
measuring unit option and cannot be changed.
4. Setting the measuring
unit
Press the SET button
on the left side of the
meter to enter the Setup
mode. First, the date
format flashes in the
upper-right corner.
To Next Page
Loading...
