Roche CoaguChek XS System - Page 39

CoaguChek XS System User Manual for Self-Testing, version 10.0 USA
39
3. Match the Code
Numbers
Confirm that the number
displayed matches the
number on the test strip
container, then press the
M button .
If the numbers are
different, make sure you
are using the code chip
that came with the test
strips you are using.
4. Warming up the Test
Strip
The hourglass symbol
shows that the test strip is
warming up for about 30
seconds. When the
warming-up process is
complete, a beep tone
(provided the beep tone is
turned on) indicates that
you can now apply blood.
am
11:24 21 -- 1509