Roche cobas Urisys 1100 Owner's Manual

Urisys  - Operator’s Manual V. 
Menu Structure (continued)
Pressing the START button confirms the setting, closes the submenu, and resumes Ready-to-Measure status.
STRIP SETTINGS
Limits
SETUP 3
Language DeviceID Op.ID
UNITS: CONV
Single Combined
UNITS: CONV/ARB
Conv/Arb. SI/Arb.
DD.MM.YYYY hh:mm
<<<< + -
SEQUENCE PARAMETERS
New Default
SETUP 2
Date/Time Par. Setup3
UNITS: CONVENTIONAL
Conv. SI Arb.
DD.MM.YYYY hh:mm
Sequence 12/24 Set
OPERATOR ID: AUTH.
Download list Log*
LANGUAGE: ENGLISH
Other
1.PARAM.: SG
Yes No
LOGDATA
Print (last 20) Send
PRINTING
Stop
SENDING
OPERATOR ID: ON
On Auth. Off
SETUP 1
Modes
Strip
Setup2
*Only by supervisors in
Authentication Mode
RANGE LIMITS
New Default
LEU: neg 57%
Next + Sensitiv. -
SW > = 5.7 (International Version)
Parameter selection
LEU: 25 53%
Next + Sensitiv. -
NIT: neg %
Next + Sensitiv. -
etc.
04_4_UX3INT2mit OPID_EN.vsd
Units

Roche cobas Urisys 1100 Specifications

General

Brand	Roche
Model	cobas Urisys 1100
Category	Measuring Instruments
Language	English