Urisys - Operator’s Manual V.
Barcode Reader
Barcode readers suitable for use with Urisys with SW Version . and above must meet the following specifications:
• Radio frequency interference class B according to EN -
• Electromagnetic interference immunity requirements for industrial locations according to EN -
There is a recommended barcode reader to read commonly used barcodes such as Codabar, Code , Code and
Interleaved of .
If a barcode reader and an external keyboard have to be connected a data cable CAB IBM AT/XT DIN is needed.
For questions regarding the operation of the Urisys system with barcode readers, please contact your local Roche
Diagnostics representative.
. Technical Information and Notices
. Technical Data
Dimensions: Width: approx. mm
Depth: approx. mm
Height: approx. mm
Weight:
<
, kg
Power supply:
External mains adapter
Input: - V A
C, / Hz, mA
Output: . V DC
, mA
P
olarity: –
+
Consumption: Operating: max. W
Standby: . W
Noise level: dB
System description: Type: reflectance photometer
Light source: LEDs (light emitting diodes)
Wavelengths: nm (green) x
nm (orange) x
Reader head: head with LEDs
Measuring cycle: Normal Mode: approx. sec
Fast Mode: approx. sec
Incubation time: - sec
Printer: thermal printer
Display: liquid crystal display, lines of characters
Memory: samples
Date, time: integrated clock
Operating conditions: Operating In storage
Temperature: + ° to + °C – ° to + °C
Relative humidity: % to % % to %
Optimum operating conditions: Temperature: + ° to + °C
Relative humidity: % to %
Lifetime:
Test strip tray: months after first date of use
Interfaces:
PC/HOST: serial, D-Sub socket, -pin, female, unidirectional, bidirectional or ASTM protocol
(selectable)
AT/PC keyboard:
Barcode reader
-pin DIN socket, female
Cer
tification marks:
UL, cUL
To Next Page
Loading...
Need help?
General
