Rocket BOXER - 4.1 Connections to be provided by the user; 4.2 Water supply

43
BOXER
EN
Water supplies to the machine
must be suitable for consump-
tion by man and for human uses,
in compliance with all the laws in
force in the installation site.
The installation technician is required to get
conrmation from the nal owner and/or user
of the system that the water meets all the
foregoing requirements.
For machine installation it is necessary to
use all the components and/or parts supplied
on issue with the machine. Should it ever be
necessary to use other parts and/or compo-
nents, the installation technician is required to
MACHINE
UNDER
MAINTENANCE
i
4.2 Water supply
Make sure that the maximum
supply pressure of water does
not exceed 6.5 bar; otherwise,
install a pressure reducer.
Connections must be installed close to the
machine.
Water supply pipe, with a 3/8”G cut-o󰀨 tap (2
- g._4.3). Connect the exible hose supplied
to the machine tting (1 - g._4.4), which can
be reached directly from underneath the ma-
chine or from above, after removing the grid
and the tray.
MACHINE
UNDER
MAINTENANCE
i
R
O
C
K
E
T
E
S
P
R
E
S
S
O
M
I
L
A
N
O
R
O
C
K
E
T
E
S
P
R
E
S
S
O
M
I
L
A
N
O
g_4.4
R
O
C
K
E
T
E
S
P
R
E
S
S
O
M
I
L
A
N
O
R
O
C
K
E
T
E
S
P
R
E
S
S
O
M
I
L
A
N
O
g_4.3
4.1 Connections to be provided
by the user
Connections must be carried out
       
accordance with federal, state
and local regulations.
1. Water drainage pipe (1 - Fig. 4.3), hav-
ing an internal diameter of min. 30mm,
equipped with a water-trap accessible for
inspection.
2. Water supply pipe (2), with a 3/8”G cut-o󰀨
tap.
3. Circuit breaker (3)
4. Water softener (Optional-4)