44
BOXER
EN
g_4.6
verify that said other parts and/or components
are suitable for contact with water for human
consumption/drinking water. The technician
in charge of installation is required to perform
all the hydraulic connections so that they are
totally compliant to all the related rules, regula-
tions and provisions in force in the installation
site on hygiene, hydraulic system safety and
environmental protection.
The machine has to operate with clean
soft drinking water. Never attempt to run
the machine with water of hardness other
The manufacturer recommends use of an
Check the eciency of the machine’s water
drain. Drain tray is located under the drip tray.
(1 - g._4.5)
Underneath the tray, there is a hose connec-
tor (2 - g._4.5) to which a pipe to drain the
remaining water is connected.
4.3 Water drain
Before connecting the machine
ensure that the type label details
comply with those of the electric
distribution network.
The electrical connection cable must be di-
rectly connected to the connection provided
according to current legislation.
The machines can have a three-phase
power supply using a 5-conductor cable (3
phases + neutral + earth).(g._4.6). (see
chap. 3.2 Technical specications)
The electrical connection cable must be di-
rectly connected to the connection required
according to current legislation. Ensure that
the earthing system is ecient and in compli-
ance with current legal requirements.
4.4 Electric supply
R
O
C
K
E
T
E
S
P
R
E
S
S
O
M
I
L
A
N
O
R
O
C
K
E
T
E
S
P
R
E
S
S
O
M
I
L
A
N
O
g_4.5