Rockwell Automation 9300-ENA User Manual

Ethernet Network Appliance (with Network Address Translation) 9
Publication
9300-IN001A-EN-P - December 2012
3. Hook the top slot over the DIN rail and push the module into
position on the DIN rail.
Remove the Module
To remove the module from DIN rail, proceed as follows.
1. Place a screwdriver in the DIN-rail latch at the bottom of the module.
2. Hold the module and pry downward on the latch until the module is
released from the DIN rail.
31873-M
31874-M

Rockwell Automation 9300-ENA Specifications

General

Brand	Rockwell Automation
Model	9300-ENA
Category	Network Hardware
Language	English