Rockwell Automation Publication IOLINK-UM001A-EN-P - August 2017 27
Chapter 5
Register the 836P IODD
Registration Procedure
To initialize a sensor on an IO-Link Master, register the IODD of the sensor.
The I/O Device Description (IODD) files contain the information that is
related to the sensor, integrated into the system environment.
By default, the IODDs are already located in the AOP Library.
If the IODD file for the 836P cannot be located in the library, it can be
downloaded from http://compatibility.rockwellautomation.com/Pages/
MultiProductDownload.aspx. Once the IODD is registered, there is no need
to register the IODD again unless it is manually deleted from the Master Tree.
1. Double-click the 1734-4IOL in the Controller Organizer Tree.
2. Select the IO-Link configuration tab.
To Next Page
Loading...
Need help?
General
