Rockwell Automation Publication 842E-UM002A-EN-P - November 2013 5
Preface
Read this section to familiarize yourself with the rest of the manual. It
provides information concerning:
• Who should use this manual
• The purpose of this manual
• Related documentation
• Conventions used in this manual
Who Should Use This Manual
Use this manual if you are responsible for designing, installing,
programming, or troubleshooting control systems that use the encoder.
You should have a basic understanding of electrical circuitry and
familiarity with relay logic. If you do not, obtain the proper training
before using this product.
Purpose of This Manual
This manual is a reference guide for encoders. It describes the procedures
you use to install, wire, and troubleshoot your encoder. This manual:
• Gives you an overview of the encoders
• Explains how to install and wire your encoder
• Explains how to configure the encoder in the Studio 5000™
environment
Common Techniques Used in
This Manual
The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural
steps.
• Numbered lists provide sequential steps or hierarchical
information.
• Italic type is used for emphasis.
To Next Page
Loading...
Need help?
General
