Rockwell Automation Publication 442G-UM002B-EN-P - August 2021 23
Chapter 3 Use the Multifunctional Access Box in an Integrated Safety Controller-based System
4. The Request History panel displays the MAC IDs of access boxes that
issue DHCP requests.
Select the appropriate access box.
5. Click Add to Relation List.
The New Entry dialog box appears.
6. Type an IP Address, Hostname, and Description for the access box.
Click OK.
7. To assign this configuration to the access box, wait for the access box to
appear in the Relation List panel and select it.
Click Disable BOOTP/DHCP.
The access box now uses the assigned configuration and no longer issues
DHCP requests.
IMPORTANT If you do not select Disable BOOTP/DHCP, then on a power cycle the
access box clears the current IP configuration and begins sending
DHCP requests again.
To Next Page
Loading...
