Quick Reference
Original Instructions
Micro800 Controllers Starter Pack
Catalog Numbers 2080-LC10-STARTERPACK, 2080-LC20-STARTERPACK, 2080-LC20-STARTERPACKL, 2080-LC50-STARTERPACK,
2080-LC50-STARTERPACKL
Summary of Changes
This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect
all changes.
About This Publication
The Allen-Bradley® Micro800™ Programmable Logic Controllers (PLCs) family, a part of the Rockwell Automation Micro Control System, is a
range of small-sized controllers that are designed for use with standalone machines that require a limited amount of control.
The Starter Pack helps you to become acquainted with the Micro800 controllers and Connected Components Workbench™ programming,
simulation, and configuration software.
Getting Started
If you are using a Micro800 controller for the first time, we recommend that you follow the Micro800 Controllers Starter Pack Quick Start,
publication 2080-QS004
– this guide provides step-by-step instructions on how to use a Micro800 controller and a PanelView™ 800 graphic
terminal with Connected Components Workbench software.
For information on the Micro800 controllers, see the Micro Control Systems section at rok.auto/micro800
. This website contains the latest
information on the different controllers, plug-in modules, and accessories that are available in the Micro800 family.
For Micro800 controller tutorial videos to help you shorten configuration and programming time, visit rok.auto/micro800videos
. This website
also provides more information on the Micro800 control system.
For more advanced functionality of Micro800 controllers and reference information about the instruction set available, see the Micro800
Programmable Controllers General Instructions Reference Manual, publication 2080-RM001
.
Topic Page
Summary of Changes 1
About This Publication 1
Getting Started 1
Other Resources 2
Wiring the Input Simulator 3
Additional Resources 4
Topic Page
Updated template throughout
Updated Getting Started 1
Updated Connected Components Workbench Software 2
Updated PanelView 800 Graphic Terminals 2
Updated Sample Code Library 2
To Next Page
Need help?
General
