Rockwell Automation Publication PFLEX-AP005A-EN-P - October 2010 63
Chapter
3
Network Communications
Overview
A PowerFlex 700 drive with a communication option card can be replaced with a
PowerFlex 750-Series drive. The process to migrate can vary significantly
depending upon the communication option in the PowerFlex 700 drive, the
controller type communicating to the drive, and which PowerFlex 750-Series
drive model is selected.
This section will show what PowerFlex 700 20-COMM network options can be
migrated to the PowerFlex 750-Series drives, and introduce the dedicated
communications that are in the PowerFlex 750-Series drives. Because of the wide
variety of networks, processors, and drive options to consider, only migration
guidelines will be covered instead of step-by-step procedures.
To Next Page
Loading...
