Rockwell Automation ARMORSTART User Manual

80 Rockwell Automation Publication 280E-PM001A-EN-P – August 2011
Appendix B ArmorStart
®
EtherNet/IP
™
Communications & Control Programming Manual
4. Click in the administrative settings folder to expand it and the following is
displayed:
5. Click in the Network Configuration tab and a prompt to enter a User
Name and a Password is displayed. Enter the pre-set User Name and
Password or if they have not been set up previously, use the default User
Name and Password. The default User Name is Administrator and there is
no password set by default.

Rockwell Automation ARMORSTART Specifications

General

Brand	Rockwell Automation
Model	ARMORSTART
Category	Controller
Language	English