Rockwell Automation ARMORSTART User Manual

Rockwell Automation Publication 280E-PM001A-EN-P – August 2011 81
ArmorStart
®
EtherNet/IP
™
Communications & Control Programming Manual Appendix B
6. After the appropriate User Name and Password is entered, the screen
below is displayed. From this screen you are able to change the Ethernet
Configuration. For example, the default IP address shown is changed from
192.168.1.1 to 10.10.10.101. After a power cycle the new address must be
used to access the web page.

Rockwell Automation ARMORSTART Specifications

General

Brand	Rockwell Automation
Model	ARMORSTART
Category	Controller
Language	English