Rockwell Automation FlexPak 3000 OIM - Page 7

List of Tables
V
List of Tables
Table 2.1 – Programming Key Descriptions ............................................................. 2-2
Table 2.2 – Control Key Descriptions ....................................................................... 2-4
Table 2.3 – Drive Status Indicators........................................................................... 2-6
Table 2.4 – Key Indicators........................................................................................ 2-7
Table 2.5 – Special Display Characters.................................................................... 2-8
Table 3.1 – Parameter Displays That are Affected by Scaled Units......................... 3-4
Table 5.1 – Parameters Configured by CML and Speed Loop Self-Tuning ............. 5-4
Table 6.1 – Effect of Control Source and Reference Settings on the AUTO/MANUAL
Indicator and OIM Displays................................................................... 6-3
Table 7.1 – OIM Failure Causes and Solutions........................................................ 7-6