Maintenance
Repair
MagneMover LITE Service Manual 75
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
2. Reference the labels that were previously placed on the cables and reconnect the
cables to the motor.
3. Restore power to the section of the MM LITE transport system where the motor was
replaced.
4. Revise the MICS file (see Create/Revise Configuration Files on page 70).
5. Upload the revised MICS file to all node controllers (see Upload Configuration Files
on page 71).
6. Program the masters and slaves on the new motor with the current Motor ERF Image
files (see Programming Ethernet Motors on page 76).
7. Resume motion on the section of the MM LITE transport system where the motor was
replaced.
To Next Page
Loading...
Need help?
General
