Index
Index-1
INDEX
Numerics
10-pin linear plug, 2-5
A
AC Drive object, C-23
Accel Time parameter, B-4
accessing parameters, 3-4 to 3-5
Acknowledge Handler object, C-24
adapter,
see
DeviceNet option board
Analog Input parameter, B-3
Analog Maximum parameter, B-6
Analog Minimum parameter, B-5
assemblies
definition, D-1
relationship to I/O messaging, 5-1
selecting, 3-7
Assembly object, C-6
Auto Restart Attempts parameter, B-4
Auto Restart Delay parameter, B-4
autobaud, B-7, D-2
B
Base Frequency parameter, B-5
Base Voltage parameter, B-5
baud rate,
see
data rate
bit definitions, C-7, C-9
bus off, D-1
Bus Off Count parameter, B-7
Bus Off Error parameter, B-7
Bus Voltage parameter, B-3
C
cables, 2-5
change of state
definition, D-1
parameter, B-9
setting the mask, 3-10 to 3-11
setting up scan list, 4-2 to 4-5
classes, D-1
COMM status indicator
at first power up, 2-6
locating, 7-1
understanding, 7-2
Command Frequency parameter, B-3
communications fault action, 3-9
communications module,
see
DeviceNet option
board
communications specifications, A-1
components, 1-1
configuration tools, 3-1
configuring a scanner, 4-1 to 4-8
configuring the option board, 3-1 to 3-12
connecting the option board to the network, 2-5
connecting the option board to the unit, 2-2
Connection object, C-10
Control Supervisor object, C-20
controllers
definition, D-1
explicit messaging, 6-1 to 6-5
I/O messaging, 5-1 to 5-5
see
also
scanners
COS Mask parameter, B-9
COS,
see
change of state
cover
installation, 2-5 to 2-6
removal, 2-2
creating EDS files, 3-3 to 3-4
current draw, A-1
cyclic I/O, definition, D-1
D
daisy chain, 2-4
data rate
definition, D-1
parameter, B-7
relation to cable length, D-2
setting with a parameter ,3-6
setting with switches, 2-4
specifications, A-1
Decel Time parameter, B-4
To Next Page
Loading...