Index
Index-3
input I/O
illustrated example, 5-2
mapping in the scanner, 4-6
Input Status parameter, B-3
installation
applying power, 2-6
commissioning the unit for DeviceNet, 2-3 to
2-4
connecting the cover, 2-5 to 2-6
connecting the option board to the unit, 2-2
connecting to the network, 2-5
DeviceNet option board, 2-1 to 2-6
EMC Directive 89/336/EEC, 2-1
Low Voltage Directive 73/23/EEC, 2-1
preparing, 2-1
IR compensation parameter, B-5
L
ladder logic programs
example for explicit messaging, 6-3 to 6-5
example for I/O, 5-3
Last Fault parameter, B-3
LEDs,
see
status indicators
list of parameters, B-3 to B-9
Load Current parameter, B-3
logic command/status
definition, D-3
enabling, 3-7 to 3-8
Low Voltage Directive 73/23/EEC, 2-1
M
MAC ID,
see
node address
mapping the unit’s data in the scanner, 4-5 to 4-8
mask for change of state, 3-10 to 3-11
master/slave hierarchy, D-3
Maximum Frequency parameter, B-4
mechanical specifications, A-1
Message Router object, C-4
messages
explicit, 6-1
I/O, 5-1
types, C-1
Minimum Frequency parameter, B-4
Motor Data object, C-19
motor,
see
VSM500 Integrated drive/motor
mounting the option board, 2-2 to 2-3
N
network control, 3-7 to 3-8
network reference, 3-8
Network Who window 3-4
node address
definition D-3
parameter, B-6
setting with a parameter, 3-5 to 3-6
setting with switches, 2-3 to 2-4
NV Baud Rate parameter, B-7
NV MAC ID parameter, B-7
O
objects
definition, D-3
list, C-1 to C-24
option board,
see
DeviceNet option board
output assemblies
bit definitions, C-7 to C-8
definition, D-1
parameter ,B-7
selecting, 3-7
Output Assembly parameter, B-7
Output Current parameter, B-3
Output Frequency parameter, B-3
output I/O
illustrated example ,5-2
mapping in the scanner, 4-7
Output Voltage parameter, B-3
P
Parameter Group object, C-16 to C-18
Parameter object, C-14to C-15
parameters
accessing, 3-4
groups, B-2
numeric list, B-3 to B-9
setting DIP switch 10 to enable, 2-3
specific name,
see
name
PCCC, 1-2
polled I/O
definition, D-3
setting up scan list, 4-2 tp 4-5
Power Unit Temperature parameter, B-3
Preset Speed 1 - 7 parameters, B-6
processors,
see
controllers
producer/consumer networks, D-4
product codes, B-1
programmable logic controllers,
see
controllers
To Next Page
Loading...