To Next PageTo Next Page
Need help?Do you have a question about the RODE Microphones WIRELESS GO and is the answer not in the manual?
General| Polar Pattern | Omnidirectional |
|---|---|
| Frequency Range | 50Hz - 20kHz |
| Weight (Transmitter) | 31g |
| Weight (Receiver) | 31g |
| Analog Outputs | 3.5mm TRS |
| Audio Resolution | 24-bit / 48kHz |
| Charging | USB-C |
| Dimensions (Transmitter) | 44 x 45.3 x 18.5 mm |
| Microphone Type | Condenser |
| Transmission Type | 2.4GHz digital |
| Operating Range | 70m (line of sight) |
| Battery Life | 7 hours |
| Acoustic Principle | Pressure |
| Power Requirements | Built-in rechargeable battery |
| Analog Inputs | 3.5mm TRS |
Explains compatibility with various recording devices and port types.
Differentiates TRS and TRRS plugs based on bands and signal direction.
Guides on identifying input/output ports on cameras, computers, and phones.
Steps to power on the transmitter and receiver and attach the windshield.
Connects the receiver to a Canon M50 camera using the TRS-to-TRS cable.
Connects the receiver to a computer's input port for audio recording.
Connects receiver to a computer's output port using TRS-to-TRRS cable.
Connects receiver via splitter cable for audio and headphone use.
Connects receiver to an iPhone/iPad using TRS-to-TRRS cable and Lightning adapter.
Connects receiver to an Android phone/tablet via TRS-to-TRRS cable.
Details how to recharge the transmitter and receiver using USB cables.
Advises on interpreting receiver screen volume meter and line colors.
Recommends testing and adjusting gain level before recording.
Guides on optimal transmitter placement relative to the sound source.
Suggests using a lapel mic with the transmitter for better placement.
