THE MELODY COUPLER
When the
MELODY
piston is pressed,
it
will light. Any stop
or
coupler
of
the Swell Division
will sound from the highest key being played
on
the Great manual. This allows a solo melody and
an accompaniment to be played from the same manual.
In its normal setting, the Melody Coupler affects keys 25 through
61
on the Great manual, but its
range is programmable.
• How
To
Set The Range
Of
The Melody Coupler:
1.
Hold
SET
and press the MELODY piston which starts flashing.
2. Release the
SET
piston and MELODY piston.
3. While the
MELODY
piston is flashing, press a key which corresponds to the lowest
note the range is to extend. Any note from key 1 to key
61
may
be
selected. After the
selected
key
has been pressed, the MELODY piston will stop flashing.
Note:
When
a key is pressed to set the range, no sound will
be
heard even
if
stops are
on, so no disturbance will be made
if
programming during a perfonnance.
7
To Next Page
Loading...
