ENABLING/DISABLING MIDI MASTER CHANNELS
The following MIDI channels are used to control the organ through MIDI:
Great Master Channel 12
Swell Master Channel
13
Pedal Master Channel 14
It is possible to stop the transmission or reception
of
MIDI information on these Master
Channels.
•
To
Disable Reception
Of
Information
On
A MIDI Master Channel:
1.
Hold SET and press the bottom
of
the MIDI coupler corresponding to the channel to be dis-
abled. It will flash. Release SET and the MIDI coupler.
2.
While the coupler is flashing, press the top
of
the MIDI coupler (as
if
turning off).
It
will
stop flashing.
• To Enable Reception
Of
Information
On
A MIDI Master Channel:
1.
Hold SET and press the bottom
of
the MIDI coupler corresponding to the channel to be
enabled. It will flash. Release SET and the MIDI coupler.
2. While the coupler is flashing, press the bottom
of
the MIDI coupler (as
if
turning on). It will
stop flashing.
When transmission on all MIDI Master Channels is inhibited, then no stop change (MIDI
System Exclusive stop change) is transmitted.
• To Disable Transmission
Of
Information On A MIDI Master Channel:
1.
Hold SET and press the MIDI coupler corresponding to the MIDI Master Channel to disable.
It will flash. Release the MIDI coupler.
2.
While the coupler is flashing, hold
SE~
and press the top
of
the MIDI coupler (as
if
turning
off). It will stop flashing.
• To Enable Transmission
Of
Information
On
A MIDI Master Channel:
1.
Hold SET and press the bottom
of
the MIDI coupler corresponding to the MIDI Master
Channel to enable.
It
will flash. Release the MIDI coupler.
2.
While the coupler is flashing, hold SET and press the bottom
of
the MIDI coupler (as
if
turn
ing on).
It
will stop flashing.
The send and receive status
of
all MIDI Master Channels will be saved in the combination action
of
the 702.
13
To Next Page
Loading...
