LOCAL
ON/OFF
The 702 is equipped with a LOCAL ON/LOCAL OFF control. When the organ is set to LOCAL
ON,
it
operates normally.
When the organ is set to LOCAL OFF, none
of
the organ stops sound when keys
or
pedals are
pressed. MIDI information is, however, generated on activated MIDI Master Channels and MIDI
coupler channels. In addition, movement
of
the Expression Pedal generates MIDI volume informa-
tion on activated MIDI Master Channels and MIDI Coupler Channels but does not affect the organ
stop volume.
An
application for this is when sequencing, the volume
of
the organ may be sequenced
one way, and the volume
of
the MIDI voices another way.
MIDI information received on the MIDI Master Channels will still control the 702 when the
organ is set to LOCAL OFF.
• To Set
The
Organ
To
LOCAL
OFF:
1.
Hold SET, and press any MIDI coupler. It will flash.
2. Hold SET, and press and release General Cancel. The General Cancel light will go off, signi-
fying LOCAL OFF is activated.
• To Set
The
Organ
To
LOCAL
ON:
1.
Hold SET, and press any MIDI coupler.
It
will flash.
2. Hold SET, and press and release General Cancel. The General Cancel light will go on, signi-
fying LOCAL ON is activated.
The Local On/Off status can be saved in the combination action
of
the organ.
RETURNING
TO
DEFAULT
SETTINGS
To
return to the default settings for Send Channel, Detected/Fixed Velocity, Octave Transpose,
MIDI Master Send Channel, Primary Receive Channel and Local On/Off:
1.
Hold SET and press General Cancel (0). The SET light will go
off
and the MIDI parameters
will be set to factory default.
2. Continue to hold SET and General Cancel for about 5 seconds until the SET light comes
back on. The General and Divisional pistons for the selected memory will be restored to fac-
tory default. Repeat this procedure for each memory bank you wish to restore.
3. Continue to hold SET and General Cancel for about 5 seconds more until memory 1piston
lights. The Melody and Bass couplers will be restored to their factory default settings, the
Chorus will be set to its factory tuning, and the Tutti will be set to the factory default setting.
In
addition, an All Notes Offmessage is generated to clear any problems with otherMIDI equip-
ment, so this can be used as a "Panic Button" should any other MIDI devices get confused.
If
the
SET and General Cancel buttons are held in until the SET button lights again, then the combination
action for the current memory level will be reloaded with factory defaults selections.
17
To Next Page
Loading...
