Rohde & Schwarz NGMO1 - Page 19

Unit Description Power Supply NGMO
4.00 / 07-2004 3-5
• deviation from full scale 10 mA 10 mA
with ±10 % AC supply variation
1 mA 1 mA
from 10 to 90 % load change 2.5 mA 2.5 mA
• current sink capability 2.8 A (0 to 5 V) derating up
to 1 A at 15 V
2.8 A (0 to 5 V) derating up
to 1 A at 15 V
Voltage measurement
- Range -5 to 25 V -5 to 25 V
• resolution 1 mV 1 mV
• deviation from full scale 0.03 % +3 mV 0.03 % +3 mV
- Measurement time 2 ms to 200 ms settable 2 ms to 200 ms settable
• averaging 1 to 10 values 1 to 10 values
Current measurement
- Ranges 7 A/0.5 A/5 mA 7 A/0.5 A/5 mA
• resolution 200 µA/10 µA/0.1 µA 200 µA/10 µA/0.1 µA
• deviation from full scale 15 mA/1 mA/10 µA 5 mA/1 mA/10 µA
- Measurement time 2 ms to 200 ms settable 2 ms to 200 ms settable
• averaging 1 to 10 values 1 to 10 values
Dynamic measurement
- Sample buffer 1 to 5000 points 1 to 5000 points
- Sample time 10 µs to 1 s in 10 µs steps 10 µs to 1 s in 10 µs steps
- multiple trigger 1 to 100 1 to 100
- Triggering system
• ranges 5 A/0.5 A 5 A/0.5 A
• settable levels
range 5 A 0 A to 7 A in 200 µA steps 0 A to 7 A in 200 µA steps
range 0.5 A 0 mA to 0.5 A in 10 µA
steps
0 mA to 0.5 A in 10 µA
steps
• DVM -5 V to 25 V in 1 mV steps -5 V to 25 V in 1 mV steps