Rohde & Schwarz NGMO1 - SOURCE Command Summary

IEEE Commands Power Supply NGMO
4.00 / 07-2004 5-17
5.5 SOURCE command summary
Com-
mand
Parameter Par. value Description Def. SCPI
:SOURce [:A] Channel A /
Channel 1
:SOURce
[1]
Channel A /
Channel 1
:SOURce :B Channel B /
Channel 2
:SOURce2 Channel B /
Channel 2
:VOLTage :PROTec-
tion
<CHAR_VAL> or
<NUM_VAL>
Sets VPT offset in
100mV steps
2.0
1.5 1.5 Volt
22 22 Volt
MIN 1.5 Volt
* DEFault 22 Volt
MAX 22 Volt
DISPlay Sets LCD to
VOLTAGE
PROTECTION
:VOLTage :PROTec-
tion?
<CHAR_VAL> Queries VPT
offset
Results:
0.0 <= NUM_VAL
<= 10.0
MIN 0.00
DEFault 2.0
MAX 10.0
:VOLTage :PROTec-
tion
:STATe? Queries VPT
state
Results:
0 -> not triggered
1 -> triggered
:VOLTage :MAXSet-
ting
<CHAR_VAL> or
<NUM_VAL>
Sets max. settable
output voltage
15
0.00 0 Volt
15.00 15 Volt
MIN 0 Volt
* DEFault 15 Volt
MAX 15 Volt
DISPlay Sets LCD to
Maximum output
voltage
:VOLTage :MAXSet-
ting?
<CHAR_VAL> Queries max.
settable output
voltage
Results:
0.000 <=
NUM_VAL <=
15.000