Rohde & Schwarz R&S SFE100 - Monitor; 100 Base-T

Interfaces and Connectors
R&S
®
SFE100
23Getting Started 2112.4122.62 ─ 13
Table 5-2: Pin assignment
Pin Description
1 Ground
2 Ground
3 AF2 - (Audio IN)
4 AF2 + (Audio IN)
5 BTSC IN
6 AF1 - (Audio IN)
7 AF1 + (Audio IN)
8 REF FREQ OUT / Trigger Out
9 NICAM IN
5.2.5 MONITOR
HDMI interface to connect an external monitor. For further details refer to Chap-
ter 6.3.4, "External Monitor", on page 31.
5.2.6 100 BASE-T
1 Gigabit LAN interface (100 Base-T).
Used to connect the R&S SFE100 to a local network for remote control, remote opera-
tion, printouts and data transfer. The assignment of the RJ.45 CAT5 connector sup-
ports twisted pair category 7 UTP/STP cables in a star configuration (UTP stands for
"unshielded twisted pair", and STP for "shielded twisted pair").
Rear Panel
深圳德标仪器 135-1095-0799