Operating the R&S SFE100 in a LAN
R&S
®
SFE100
48Getting Started 2112.4122.62 ─ 13
2. In the tree, select "COMMUNICATION".
3. Enter the IP address in the "TCP/IP ADDRESS" field.
9.5
Firewall Settings
By default, the Windows Firewall is activated to protect the R&S SFE100 from an
attack of hostile users and programs. The Windows Firewall suppresses all network
communication which is not initialized by the R&S SFE100 itself or which is not defined
as an exception.
To enable data transfer or to allow access to the R&S SFE100, define exceptions
using the Windows XP Start menu. For details refer to the Windows XP help system or
contact your network administrator for support.
Firewall Settings
To Next Page
Loading...
