Connecting the R&S SFE100
R&S
®
SFE100
32Getting Started 2112.4122.62 ─ 13
If you have used the R&S SFE100 without monitor before, activate the HDMI interface
by pressing the CTRL+ALT+F4 key combination, several times if necessary.
For R&S SFE100s without HDMI interface, it is possible to display the screen contents
on external monitors by using remote operation on an external computer.
For details on remote operation see the user manual or the help system.
Connecting External Devices
To Next Page
Loading...
