Operating the Instrument
R&S
®
RTP
59Getting Started 1337.9946.02 ─ 05
Tap the icon. Select the source in the sidebar, or tap diagram with the waveform
to be transformed. The diagrams are created from the selected waveform.
Zone trigger (option R&S RTP-K19)
Defines a zone trigger, which combines the trigger condition with the inter-
section or non-intersection of one or more zones or masks.
Tap the icon and then tap the corner points of the zone on the screen.
5.7 Displaying Results
The results of automatic and cursor measurements, mask tests, and searches are
displayed immediately in a result box.
There are several places to display the results:
●
In a floating result box in front of the diagrams, which you can move on the
display
●
In a minimized view (result icon) on the sidebar
●
In a separate tab
●
For results of automatic measurements: in a docked tab below the diagram
The default position and the font size can be adjusted.
To arrange a result box on the display
► Touch the title of the result box and drag the box on the screen. The Smart-
Grid indicates where the result box will be placed.
● If you drop the box on one of the buttons, the results are shown in a sepa-
rate tab besides, above, or below the diagram.
● If you drop the box on the sidebar, a result icon is created.
● If you drop the box somewhere else, a floating result box is created.
Displaying Results
To Next Page
Loading...
