Rohde & Schwarz RTP044 - Rear Panel

Instrument Tour
R&S
®
RTP
23Getting Started 1337.9946.02 ─ 05
Pulse source option R&S RTP-B7
The pulse source outputs a symmetrical differential pulse signal. For detailed
specifications, refer to the data sheet.
The option can be installed in one of option slots at the front panel.
The module has four connectors.
●
Out, : 2.92 mm connectors (K type) for pulse signal output
●
Ref,
: 2.92 mm connectors (K type) for reference signal output
4.2 Rear Panel
Figure 4-2 shows the rear panel of the R&S RTP.
Figure 4-2: Rear panel of R&S RTP
Rear Panel