Rohde & Schwarz RTP044 - Setting the Display Language

Setting Up the Instrument
R&S
®
RTP
70Getting Started 1337.9946.02 ─ 05
6.2 Setting the Display Language
You can change the language in which the dialog boxes, result boxes and other
screen information is displayed. A reboot of the instrument is not necessary.
1. Press the [Setup] key.
2. Select the "System" tab.
3. Tap the "Language" button. The button shows the current language.
4. Select the required language.
The instrument changes the language after a few seconds.
Setting the Display Language