Operating the Instrument
R&S
®
RTP
50Getting Started 1337.9946.02 ─ 05
The Rohde & Schwarz SmartGrid appears and a blue area shows where the
waveform will be placed.
2. Drop the waveform in the target area.
The waveform appears in an existing or in a new diagram, and it is selected
for further actions.
3. To change the size of the new diagram, drag its edge to the required position.
5.6 Toolbar
The toolbar provides direct access to important control and measurement func-
tions. It shows current date and time, and a message button. The selected func-
tion is highlighted.
By default, the toolbar shows the most frequently used functions. You can config-
ure the content of the toolbar and hide the date/time display, see Chapter 5.6.2,
"Configuring the Toolbar", on page 52.
Toolbar
To Next Page
Loading...
