Operating the Instrument
R&S
®
RTP
62Getting Started 1337.9946.02 ─ 05
● Tap the horizontal or trigger label to open the "Horizontal" or "Trigger" dia-
log box, respectively.
To minimize a dialog box
If you want to change only one setting during analysis, and you need to change it
often, you can display a small box that only contains the required setting.
1. Tap the function that you need to modify.
2. Tap the "Minimize" icon in the upper right corner of the dialog box.
The dialog box turns into a small box that contains only the "Wfm Arithmetic"
setting.
3. To restore the complete dialog box, tap the "Maximize" icon in the small
box.
To close a dialog box
► Tap the "Close" icon in the upper right corner.
Or:
Press the [Esc] key on the front panel.
To select an option in a dialog box
► Tap the required option.
Or:
Press the [⇤] and [⇥] keys to navigate to the required option. Then press the
[☑] key.
To select an option in a list
If many options are available - for example, for the trigger type - the options are
provided in a list. The current selection is shown on the list button.
► Tap the list button. Then tap the required option.
Or:
Use the front panel keys:
a) Press the [⇤] and [⇥] keys to navigate to the list button.
b) Press the [☑] key to open the list.
Using Dialog Boxes
To Next Page
Loading...
