Rohde & Schwarz ZNB - Page 2

This manual describes the following vector network analyzer types:
●
R&S
®
ZNB4, 9 kHz to 4.5 GHz, 2 test ports, order no. 1311.6010.22
●
R&S
®
ZNB4, 9 kHz to 4.5 GHz, 4 test ports, order no. 1311.6010.24
●
R&S
®
ZNB8, 9 kHz to 8.5 GHz, 2 test ports, order no. 1311.6010.42
●
R&S
®
ZNB8, 9 kHz to 8.5 GHz, 4 test ports, order no. 1311.6010.44
●
R&S
®
ZNB20, 100 kHz to 20 GHz, 2 test ports, order no. 1311.6010.62
●
R&S
®
ZNB20, 100 kHz to 20 GHz, 4 test ports, order no. 1311.6010.64
●
R&S
®
ZNB40, 10 MHz to 40 GHz, 2 test ports, order no. 1311.6010.72 (variant 72)
●
R&S
®
ZNB40, 100 kHz to 40 GHz, 2 test ports, order no. 1311.6010.82 (variant 82)
●
R&S
®
ZNB40, 100 kHz to 40 GHz, 4 test ports, order no. 1311.6010.84 (variant 84)
●
R&S
®
ZNBT8, 9 kHz to 8.5 GHz, 4 test ports (up to 24 ports optional), order no. 1318.7006.24
●
R&S
®
ZNBT20, 100 kHz to 20 GHz, 8 test ports (up to 24 ports optional), order no. 1332.9002.24
© 2018 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1316.0062.02 | Version 26 | R&S
®
ZNB/ZNBT
Throughout this guide R&S
®
is abbreviated as R&S.