Rohde & Schwarz ZNB - Status Bar

Operating the Instrument
R&S
®
ZNB/ZNBT
48Getting Started 1316.0062.02 ─ 26
The "Hard Key" panel is particularly useful if the analyzer is controlled from an external
monitor or Remote Desktop.
For the R&S ZNB, it is hidden by default, for the R&S ZNBT it is visible by default.
You can display the "Hard Key" panel using one of the following methods:
●
Select SYSTEM – [DISPLAY] > "View Bar" > "Hard Key Panel".
●
Select "Display"> "View Bar" > "Hard Key Panel On" from the menu bar.
●
Select "Hard Key" from the context menu of the softtool panel.
4.2.7 Status Bar
The status bar shows
●
the current channel's sweep averaging counter (e.g. "Ch<i>: Avg 9/10"), or "Ch<i>:
Avg None" if averaging is disabled
●
the active channel and drive port (P1, P2 ...)
●
the progress of the sweep
The progress bar also shows when the R&S ZNB/ZNBT prepares a sweep with
new channel settings
●
the External Reference symbol, if an external reference clock is used for synchroni-
zation
●
the Redefined S-parameters symbol (if the physical ports have been redefined)
●
the LXI status symbol (if enabled; see SYSTEM – [SETUP] > "Remote Settings" >
"LXI")
Control Elements of the Application Window