Operating the Instrument
R&S
®
ZNB/ZNBT
59Getting Started 1316.0062.02 ─ 26
Use the "Zoom Reset" icon to restore the original diagram. Alternatively, you can drag
and drop the "Zoom" label from the additional channel info line onto the "Delete" tool-
bar button.
Alternative settings
●
The TRACE – [SCALE] > "Zoom" softtool tab allows you to define the displayed
zoom range numerically.
●
To zoom the stimulus range (keeping the number of sweep points constant), use
the "Zoom Stimulus" function in the "Stimulus" tab of the "Stimulus" softtool. The
latter can be opened using the keys in the STIMULUS section.
4.6.2 Setting the Sweep Range
The sweep range for all related channels is displayed in the channel info area at the
bottom of each diagram:
To change the sweep range of the active channel, use one of the following methods:
●
Use the [START], [STOP], [CENTER], and [SPAN] function keys from the STIMU-
LUS section.
●
Double-tap (with a mouse: double-click) the "Start" or "Stop" label in the channel
list.
Scaling Diagrams
To Next Page
Loading...
