Operating the Instrument
R&S
®
ZNB/ZNBT
39Getting Started 1316.0062.02 ─ 26
Figure 4-1: Function Keys
Customizing the screen
The contents of the screen and the size and position of many display and control ele-
ments are not fixed. You can display or hide most elements. You can also drag and
drop traces, info fields, and even the softtool panel to your preferred position; see
Chapter 4.4.4, "Using Drag and Drop", on page 54.
For example, you can show/hide the on-screen hardkey panel by selecting/deselecting
"Display" > "View Bar" > "Hard Key Panel On" from the main menu.
The following table shows possible touchscreen operations (R&S ZNB only) with the
corresponding mouse operations.
Touchscreen Mouse Typical task
Tap control element for a short time Click control element (left mouse button) Select button or tab
Tap for an extended time (tap and hold) Click (right button) Open context menu
Tap twice (double-tap) Double-click (left button) Open on-screen keyboard
Using (Virtual) Hardkeys
To access an instrument function:
1. Press a (virtual) key, e.g. the [MEAS] key in the TRACE section.
The corresponding softtool expands at the current docking position.
Manual Operation
To Next Page
Loading...
