Need help?Do you have a question about the Roland Camm-1 GR2-640 and is the answer not in the manual?
General| Model | Roland Camm-1 GR2-640 |
|---|---|
| Power Supply | AC 100 to 240 V ±10%, 50/60 Hz |
| Maximum Cutting Speed | 1, 485 mm/s |
| Cutting Force | 600 gf |
| Interface | USB 2.0, Ethernet |
| Maximum Cutting Area | 1, 651 (W) x 50, 000 (L) mm |
| Blade Force | 600 gf |
| Software Resolution | 0.025 mm/step |
| Distance Accuracy | ±0.1% of distance traveled, or ±0.1 mm |
| Repeatability | ±0.1 mm |
| Alignment Accuracy for Print & Cut | ±0.1 mm (0.0004 in) or less |
| Operating Temperature | 5 to 40°C |
| Operating Humidity | 35 to 80 % RH (no condensation) |
| Dimensions (with stand) | 73.8 in. (W) x 28.5 in. (D) x 44.5 in. (H) (1, 875 mm (W) x 723 mm (D) x 1, 130 mm (H)) |
To Next Page
