Roland CAMM-1 PNC-1610 - Page 39

31
Instruction Format Parameter Range ([ ] is default) Explanation
Abort Instructions
ESC .J [ESC].J: None Aborts both the currently executed device control
Abort Device Cotrol instruction and output.
Instruction
ESC .K [ESC].K: None After executing only the current CAMM-GL III
Abort CAMM-GL III instruction, clears the data buffer.
Instruction
ESC .R [ESC].R: None Initializes all settings established by the device
Initialize Device control instructions. However, each buffer size set
Control Instruction by the [ESC].T instruction is taken over.
Monitor Mode Instructions
ESC .Y ESC .( Ignored.
CAMM-1 ON
ESC .Z ESC .) Ignored.
CAMM-1 OFF
ESC .@ Ignored.
Set Monitor Mode
and Control DTR
ESC Q Ignored.
Set Monitor Mode