EasyManua.ls Logo

Roland CD-2u - Page 55

Roland CD-2u
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recording Karaoke
(continued)
55
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
7
Adjust the CD’s playback level.
Adjust the levels to obtain the desired volume balance between the CD and the mic.
* If sound from the speakers enters the mic, you won’t be able to adjust the level correctly. While
adjusting the level, either turn the [VOLUME] knob all the way down or turn the speakers off, so
no sound will be produced. Use headphones if you want to monitor the sound that’s being
recorded.
Press the [ ] (Play) button to play back the CD.
Press the [ ] or [ ] button to access the SD/CD Level setting screen.
Use the [+] [-] buttons to adjust the CD’s playback level (“SD/CD Level”).
fig.player-level.eps
* If you don’t press the [+] [-] buttons for five seconds, you’ll automatically be returned to the audio
source display.
8
Turn the [MIC] knob to adjust the input level of the external mics.
As a guideline, adjust the level so that the level meter’s “-3 dB” indicator lights briefly
when audio from the CD is being produced simultaneously with the sound from the mic.
When you’ve finished adjusting the level, press the [ ] (Stop) button to stop the CD
playback.
* When using the [MIC] knob or [LINE] knob, you might hear a slight noise when the recording
level changes; this does not indicate a malfunction.
fig.rec-line-e.eps
9
Press the [MENU] button to access the menu screen, and choose
“Overdub CD
SD?”
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Overdub CD
SD?”
fig.menu-overdub-e.eps
Press the [ENTER] button to confirm your choice.
The CD-2u/SD-2u will be in recording-standby mode.
fig.overdub-CD02-e.eps
Value
(units: dB)
Explanation
-6–0–6
Decreasing this value will lower the playback level. Increasing it will raise the playback
level.
“0” is the CD’s original playback level.
LouderQuieter
PEAK indicator
At this position
-3dB
Blinking
CD song number
to record
Recording-destination
song number on the
SD memory card
CD-2u_SD-2u_e.book 55 ページ 2013年1月24日 木曜日 午前11時34分

Table of Contents

Related product manuals