Roland DDR-30 - Managing Memory Areas (Internal and Cartridge)

b. Changing the Memories (Internal,
Cartridge A, Cartridge B)
When the power is first applied to the DDR-30, the
Internal memory is automatically selected. This
can be seen in the Display with the letters "TNT",
To use the memory of the Cartridge, take the fol-
lowing operation.
Memory Area Drum Set Drum Sound
Display Number Display
+ Internal Memory
Cartridge A
+ Cartridge В
OPERATION
(D Securely connect the Memory Cartridge as
instructed on page 18.
(3) Push the Cartridge Button ©.
The indicator of the Cartridge Button will light up,
and the left of the Display will change from
“INT "to" СЯТ-Н ", showing that Cartridge
memory A can be now in use. To change to the
Cartridge memory B, rotate the Alpha Dial. Rotat-
ing it clockwise will select B, and counterclockwise
will select A.
The Cartridge memories A and B work just like
the internal memory.
* To return to the Internal Memory mode, simply
push the Cartridge Button @.
(DInsert the Memory Cartridge securely.
Protect Switch
ON
(Push the Cartridge Button Ф.
18