Roland DDR-30 - Setting MIDI Transmit Channel

b. Setting MIDI Transmit Channel
When controlling other external MIDI device by
the DDR-30, e.g. example setup d (see page 27), it
is required to set the DDR-30's transmit channel
to the same number as the external device.
The DDR-30 allows individual channel setting for
each drum voice.
OPERATION
@ Push the MIDI Button ©.
the Back But-
ae
is shown
@ Press the Forward Button @ or
ton (until "^ 31 CHAN
in the Display.
Now, the DDR-30 is ready to set transmit chan-
nel for each drum voice. The indication at the left
of the Display “ 27” means Bass Drum, and
the number at the right is the set transmit
channel of Bass Drum. If you wish to set the chan-
nel number for BD, skip the next step than go
directly to step (4).
(8) Press the Instrument Button @ until the Dis-
play shows the drum voice whose transmit
channel you wish to change.
(à) Rotate the Alpha Dial © until the desired
channel number is shown at the right of the
Display.
© Repeat the steps @ and @ as many times if
you wish to change the channel numbers of
other drum voices.
It is possible to set several drum sounds to the
same channel numbers.
© Push the MIDI Button to leave the MID! Set-
ting mode.
Now, the indicator of the button goes out, and the
display is returned to the usual indication.
29