Roland DDR-30 - Page 30

30
с. OMNI ON/OFF
For the details of OMNI ON/OFF mode, read the
separate book "MIDI".
When the DDR-30 is set to the OMNI ON mode, it
will recognize all the messages transmitted
regardless of the set receive channel. This mode
may be selected when simultaneously controlling
the DDR-30 with the MIDI messages transmitted
from several different channels. Also, this mode
can be used when you do not know the transmit
channel of the external device.
OPERATION
@ Push the MIDI Button @
The indicator of the MIDI button lights up.
@ Press the Forward Button (9 or Back Button
Qunti“ DI OMNI’ is shown inthe display.
* At the right of the Display, the current OMNI
mode; ON or OFF is shown.
(3) К you wish to change the modes, use the
Alpha dial.
Rotating the dial clockwise will set ON, and coun-
terclockwise OFF.
@ If you wish to leave the MIDI setting mode,
push the MIDI Button @.
Now, the indicator of the button goes out, and the
display is returned to the usual indication.
Example (a. and c.)
@Push the MIDI Button Ф.
@Using Forward or Back Button: ...
ж Call "MIDI CHANNEL”
current channel
* Call " MIDI OMNI"
Current setting
@Set it as you like.
[ мт TT (I7 LICININ ICI |
ЕЕ Le
1~16
| мт TIT. гэмт |
МЕНЕ LENNA
ON/OFF