Roland DDR-30 - MIDI MIX On;Off

е. MIDI MIX ON/OFF
Usually, the signals received at the MIDI IN are
not sent out to the MIDI OUT but to the MIDI
THRU. However, it is sometimes more conve-
nient to mix the messages received from the MID!
IN and the messages of the DDR-30 itself, then
send the mixed messages from the MIDI OUT.
This is the idea of MIDI MIX.
OPERATION
@ Push the MIDI Button (9.
The left of the Display shows MIDI MIX, and the
right shows ON or OFF.
6) To change the On/Off of MIDI MIX, use Alpha
Dial.
Rotating the Dial clockwise will change to ON,
and counterclockwise OFF.
© If you wish to leave the MIDI Setting mode,
push the MIDI Button @.
Now, the indicator of the button goes out, and the
display is returned to the usual indication.
* While in the MID! Setting mode, MIDI MIX is
Off.
* When the DDR-30 is operating with MIDI MIX
On, it may suddenly stop operating. If this hap-
pens, keep pressing the MID! Button until the
Display changes.
Example (b. and d.)
@Push the MIDI Button (p.
(Using Forward or Back Button,
ж Call “BD CHANNEL”
mm
H
current channel
* Call "BD NOTE”
current Note Number
(Call other drum voice by using the Instrument
Button Q.
@Set the transmit channel or the note number of
the selected drum voice.
rard ПЕНН rara
1313 РММ ЕО LALA
T
і |
! р
f 1
A 1
7 t
rar? KOTE rara
[ tsi кин ың!
5 a
M 4
E ^
Nx P
ж Repeat these procedures (3) and @.