Roland DDR-30 - Program Change

34
f. Program Change
By using the Program Change numbers (see the
separate book "MIDI"), you can externally (e.g. by
a synthesizer} select a Drum Set of the DDR-30.
Also, it is possible to change the patch programs
on the synthesizer by operating the DDR-30.
Program Change numbers are assigned to the
Drum Sets (11 to 48) of the DDR-30 as shown
below. This combination cannot be changed.
Program ,, Drum |Ргодгат __ Drum
No. Set No. Set
Program. Drum jProgram,, Drum
No. Set No. Set
0 11 16 31 24 41
17 32 25 42
18 33 26 43
19
* For instance, when the DDR-30 receives Program
Change number 20, the Drum Set 35 {Bank 3, Set 5)
will be automatically selected.