Roland DDR-30 - Page 32

32
2) How to assign Note Numbers
OPERATION
@ Push the MIDI Button @.
(à) Press the Forward Button © and the Back
c
c
Button Ф until "^ 27 NOTE " is shown in
the Display.
Ed Ed
2 ти
Ё Zu
Note Number indication
Selected
drum voice
Current Note Number
of the selected drum voice.
Now, you can assign a Note Number to each
drum voice. The " 21 " а the left of the Display
is the drum voice and the number at the right
end is the Note Number assigned to it. If you
want to change the Note Number of the Bass
Drum, skip the next step and go directly to the
step (4).
( Press the Instrument Button © until the dis-
play shows the drum voice whose Note
Number you wish to change.
(à) If you wish to change the Note Number, use
the Alpha Dial ©.
(& Repeat the procedures (3) and (4) as many
times, if you wish to change the Note Num-
bers assigned to other drum voices.
It is possible to set the same Note Number to sev-
eral different drum voices.
© If you wish to leave this MIDI Setting mode,
push the MIDI Button.
Now, the indicator of the button goes out, and the
display is returned to the usual indication.
* The Note Numbers can be used for both receive
and transmit.