Roland EGX-400 - Axis Lm Guide_Replacement

3 Replacement of Main Parts
50
3
2
3-5 X Axis LM Guide_Repalcement (Referential Time : 35 minutes)
NOTES
1. LM GUIDE has the direction for fixing. Bottom side of the LM GUIDE has the line that indicates its
direction and the side plane of the bottom part will be the standard plane.
Push the standard plane of the LM GUIDE against the standard plane of the machine when fixing the
LM GUIDE.
Standard Plane
STANDARD PLANE of LM GUIDE
Bottom Side
Top Side
Line
Remove the Junction Board Cover.
Then, remove the Limit Switch.
1
Remove the X Axis Rail Cover, Rail Cover and Right
Side Cover.
Right Side Cover
X Axis Rail Cover
Rail Cover