Roland FP-4F - Changing the Point at Which the Keyboard Is Divided (Split Point)

28
Performing
Changing the Point at which the Keyboard is Divided (Split Point)
You can change the split point (the key at which the keyboard is divided).
The split point can be set to any value from B1 through B6.
C1 C3 C4 C5
Split point (upon power-up: F#3, included in left-hand zone)
A0
Range in which the Split Point can be assigned (B1–B6)
B1 C2 C6 C7 C8B6
1. Hold down the [SPLIT] button and press the key that you want to be the split point.
The key you pressed will be assigned as the split point, and will appear in the display.
MEMO
• Instead of the sharp (#) symbol, a quotation mark will be shown in the display.
• The modied setting will return to its original value when you turn o the power. If desired, you can have this setting be retained even while the
power is turned o (p. 39).